Product
Supplier
Encyclopedia
Inquiry
Home > Catalyst and Auxiliary > Antioxidants (Find 16 items)

Antioxidants

Find our advanced raw materials to optimize your formulations. Our certified suppliers can provide high-quality materials, so you can have the top antioxidants and experience the best antioxidant benefits. Explore detailed product information, including CAS NO., properties, and technical data, to ensure optimal performance and efficacy in creating products.

Antioxidant 1010

(6683-19-8)
Antioxidant 1010 can be applied in polyolefins, such as polyethylene, polypropylene, polybutene and olefin copolymers such as ethylene-vinylacetate copolymers. Also, its use is recommended for the processing of polymers such as polyacetals, polyamides and polyurethanes, polyesters, PVC, styrene homo- and copolymers, ABS, elastomers such as butyl rubber (IIR), SBS, SEBS, EPM and EPDM as well as other synthetic rubbers, adhesives, natural and synthetic tackifier resins, and other organic substrate

Product List

Request for quotation , get quotes from more suppliers.

Antioxidant 1076

(2082-79-3)
This product is a highly efficient, non-polluting, non-toxic, hindered phenolic antioxidant with good compatibility with most polymers. It has good resistance to discoloration caused by light and heat, and has good heat resistance and water resistance extraction performance. It is widely used as antioxidant for polyethylene, polypropylene, polystyrene, ABS resin, polyvinyl chloride, nylon, polyester, polyurethane, cellulose plastic and various rubbers. Combined with antioxidants AT-168, DLTDP, e

Product List

Request for quotation , get quotes from more suppliers.

Antioxidant 4020

(793-24-8)
This product is a polluting antioxidant. In addition to its good antioxidant properties, it also has the effects of anti-ozone, anti-bending and cracking, and inhibiting harmful metals such as copper and manganese. Its performance is similar to that of antioxidant 4010NA, but its toxicity and skin irritation are less than 4010NA, and its solubility in water is better than 4010NA (water washing loss rate: 4010NA is 50%, while 4020 is only 15-20%) . It can be widely used in the preparation of tire

Product List

Request for quotation , get quotes from more suppliers.

Antioxidant 4010NA

(101-72-4)
A general-purpose excellent antioxidant for natural rubber, synthetic rubber and latex. It has excellent protection against ozone and flexion and cracking. It is also an excellent antioxidant for heat, oxygen, light, etc. and general aging. It is often used to manufacture products with high dynamic static stress, such as aircraft and automobile tires, bicycle tires, cables, hoses, tapes, rubber rollers and other industrial rubber products. This product is polluting and should not be used for lig

Product List

Request for quotation , get quotes from more suppliers.

Antioxidant 245

(36443-68-2)
This product is used as an antioxidant for the processing of styrene polymers such as HIPS, MBS, ABS, engineering plastics such as POM, PA, and polyurethane such as spandex and the improvement of long-term thermal stability. It is also an effective chain terminator in the PVC polymerization process. This product has no effect on polymer reaction. When used in high impact polystyrene and polyvinyl chloride, it can be added to the monomer before polymerization.

Product List

Request for quotation , get quotes from more suppliers.

Azodicarbonamide

(123-77-3)
Azodicarboxamide is used as an additive to wheat flour breads and dough to improve the physical properties of the dough and the baking performance. It is also used to optimize the levels of oxidant/re ducing agents in the baking of wheat flour. As blowing and foaming agent for plastics; as maturing and bleaching agent in cereal flour. Azodicarbonamide is a dough conditioner that exists as a yellow to orange-red crystalline powder practically insoluble in water. it is used in aging and blea

Product List

Request for quotation , get quotes from more suppliers.

Antioxidant ODA

(101-67-7)
This product can also be used as an antioxidant for polyolefins and lubricating oils. It has a more prominent heat resistance effect in neoprene. If it is used together with the antioxidant TPPD, the heat resistance is better. It can also reduce the plasticity of unvulcanized neoprene and reduce the shrinkage rate during compression, which helps to adjust the size of semi-finished products and improve the stability of neoprene during storage and transportation. Mainly used to manufacture tires

Product List

Request for quotation , get quotes from more suppliers.

AO 412S

(29598-76-3)
Antioxidant412S is a high performance thioether antioxidant for the stabilization of polyolefins, styrenic polymers, and engineering plastics.

Product List

Request for quotation , get quotes from more suppliers.

Amines, C12-14-alkyldimethyl

(84649-84-3)
Pyrazole derivatives Pyrazoline is an important intermediate for medicine and dyes

Product List

Request for quotation , get quotes from more suppliers.

  • 1
  • 2
  • Go to Page Go
Antioxidants are substances that prevent the adverse effects of oxygen. It is a type of substance that can help capture and neutralize free radicals, thereby eliminating free radical damage to the human body. Antioxidants as food additives can help fight food spoilage. Antioxidants are usually added to industrial products. A common use is as a stabilizer for fuels and lubricants to prevent oxidation. It can also be added to gasoline to prevent polymerization and prevent the formation of engine fouling. "Antioxidants" on ECHEMI mainly supplies raw materials for Antioxidants.

Source Antioxidants Raw Materials by Region

More Information

Antioxidant Benefits in Industrial Applications
Antioxidants are mainly used in industrial products. They can prevent oxidation. Oxidation is a kind of chemical reaction that can degrade materials and compromise their performance. Degradation and reduced efficacy will be led to by avoiding oxidation. Antioxidants act as stabilizers in the fuel and lubricant industries. They enhance products’ longevity and performance.

Antioxidant Powder and Oils
Antioxidant powder and oils are commonly used forms of stabilizers in industrial settings. They offer versatile solutions for different industrial needs. The antioxidant powder can be easily added to solid or powdered products, it provides a convenient method to enhance stability. Meanwhile, antioxidant oil can be used in different formulations to prevent liquid and semi-liquid product’ oxidation.

Pros of Antioxidants
The inclusion of antioxidants in industrial products has many advantages. For example, they can extend shelf life, improve performance and they are cost-effective.

Complaint
Email:
Message:
Send Message