Product
Supplier
Encyclopedia
Inquiry
Home > Cosmetic Ingredient > Bulking (Find 11 items)

Cosmetic Ingredient

Check all the chemical products you need for bulking agent with CAS NO., property information, SDS. Shop bulking agent raw chemical materials from certified suppliers with detailed products information.

Polytetrafluoroethylene

(9002-84-0)
Polytetrafluoroethylene has been used in many production and domestic applications, where acid, base and organic solvent resistance are required, and is used to make non-stick POTS and dry transformers. Polytetrafluoroethylene has a soft texture and is therefore often used as a coating. When it was first developed, its main use area was the high-temperature inner wall coating of launch rockets. Polytetrafluoroethylene is also the main component of the raw material belt. It is used as insulation layer of power supply and signal line in aerospace, aviation, electronics, instruments, computers and other industries, and can make films, tube plate rods, bearings, washers, valves, chemical pipes, pipe fittings, equipment container lining, etc. Polytetrafluoroethylene has replaced quartz glassware for ultra-pure chemical analysis and storage of acids, bases, and organic solvents in industries such as atomic energy, medicine, and semiconductors. It can be made into high insulation electrical parts, high frequency wire and cable sheath, corrosion resistant chemical utensils, high cold oil pipelines, artificial organs and so on. Can be used as plastics, rubber, paint, ink, lubricating oil, grease and other additives. High temperature and corrosion resistance, Polytetrafluoroethylene has excellent electrical insulation, aging resistance, low water absorption, and excellent self-lubricating properties. Polytetrafluoroethylene is a versatile lubricating powder suitable for various media. It can be quickly applied to form a dry film and used as a substitute for graphite, molybdenum, and other inorganic lubricants. Release agent for thermoplastic and thermosetting polymers with excellent load bearing capacity. It is widely used in elastomer and rubber industry as well as anti-corrosion. Polytetrafluoroethylene is used as a filler for epoxy resins to improve the wear resistance, heat resistance and corrosion resistance of epoxy adhesives. Polytetrafluoroethylene is mainly used as a binder and filler for powder powders. Some Polytetrafluoroethylene is also used in military technology weapons. For example, the gun assembly inside the US M4A1 carbine cartridge is plated with a layer of polytetrafluoroethylene to enhance the life of the weapon.

Product List

Request for quotation , get quotes from more suppliers.

Polydextrose

(68424-04-4)
Bulking agent for reduced calorie foods. Polydextrose is a bulking agent that is a randomly bonded conden- sation polymer of dextrose containing small amounts of bound sor- bitol and citric acid. it is a water-soluble powder providing a ph range of 2.5–3.5. it is partially metabolized which results in a caloric value of 1 cal/g. as a reduced-calorie bulking agent, it can partially replace sugars and in some cases fats in reduced-calorie foods. it also functions as a bodying agent and humecta

Product List

Request for quotation , get quotes from more suppliers.

Palygorskite ([Mg(Al0.5-1Fe0-0.5)]Si4(OH)O10.4H2O)

(12174-11-7)
Attapulgite clay mines use attapulgite as the main mineral component. In the chemical industry, it is mainly used as a coagulation inhibitor for urea and granular fertilizers, a processing aid for rubber, a clay thixotropic thickener for polyester resins, a carrier for pesticides, a catalyst for diaminophenylmethane and dichloroethane, and plastics. The filler and foaming decolorizing agent, etc. It is also widely used in coatings, petroleum, casting, military, building materials, papermaking, m

Product List

Request for quotation , get quotes from more suppliers.

Panicum miliaceum, ext.

(90082-36-3)

Request for quotation , get quotes from more suppliers.

  • 1
  • 2
  • Go to Page Go
Bulking in cosmetics refers to non-reactive, chemically inert solid ingredients that serve to dilute other solids or increase the volume of cosmetic products. According to their source, they are classified into inorganic and organic bulking agents. According to their application, baulking agents can be categorized as filling agents and thickening agents. According to the particle size, bulking includes fine particle and coarse particle bulking agents. "Bulking" on ECHEMI mainly supplies raw materials for bulking agents.

More Information

Bulking refers to non-reactive, chemically inert solid ingredients utilized in cosmetics to dilute other solids and/or increase the volume of the product. These bulking agents primarily work by occupying space within the product, thereby enhancing its volume without affecting its chemical composition.

They increase the volume of cosmetic products, allowing manufacturers to produce larger quantities economically. Bulking agents contribute to the desired texture and consistency of the product, ensuring it applies smoothly and evenly. They also help stabilize formulations, preventing ingredients from settling or separating. Moreover, by diluting more expensive active ingredients, bulking agents can help reduce production costs without compromising product quality.

The main components of bulking agents include:

● Talc

● Silica

● Mica

● Calcium carbonate

● Nylon powder

Complaint
Email:
Message:
Send Message